Whirlpool ACE184XR0 manual Air Conditioner Use, Starting Your Air Conditioner- Digital Control

Models: ACE184XR0

1 36
Download 36 pages 44.83 Kb
Page 11
Image 11
AIR CONDITIONER USE

Position ground wire pointing straight up. Put excess ground wire between coil and air conditioner cabinet.

A

Starting Your Air Conditioner—Manual background B

A. Green ground wire

B. Ground screw

6.Push front panel straight on and then lower it slightly to lock it into place.

7.Using the indents in top of filter door, pull door down.

A

A.Indents

8.Using 2 - #8 - 18 x ³⁄₈" round-head screws, attach bottom front of panel.

A

B

A. Front of unit

B. 2 - #8 - 18 x ³⁄₈" round-head screws

NOTE: For through-the-wall installations, if needed, install molding around room side of cabinet.

Manual backgroundWARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

9.Plug into a grounded 3 prong outlet.

10.Press RESET on the power supply cord.

AIR CONDITIONER USE

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

If you turn the air conditioner off, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.

Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.

NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.

Starting Your Air Conditioner—

Digital Control

11

Page 11
Image 11
Whirlpool ACE184XR0 manual Air Conditioner Use, Starting Your Air Conditioner- Digital Control, Electrical Shock Hazard