SRS Labs 8953H user manual Install Live Viewer, Software Installation Procedure

3.Using the Live Mode

3.2Install “Live Viewer 3” (continued)

3.2.2 Software Installation Procedure

1)Turn on the PC.

2)Shut down all applications.

3)Insert the accompanying CD-ROM into the PC's CD-ROM drive.

NOTE • After sequence 3, the User Account Control (UAC) dialog will appear (if you are using Windows Vista). Please click [Allow] to continue installation.

4)After a moment, the Choose Setup Language dialog will appear as shown on the right. Select what you like to use in the list, and click [OK].

NOTE • If the Welcome dialog doesn't appear, proceed as follows:

(1)Click on the [Start] button on the toolbar and select the “Run”.

(2)Enter E:\software\setup.exe and then press [OK].

If your CD-ROM drive is not drive E on your PC, you will need to replace E with the correct drive letter assigned to your CD-ROM drive.

If the software has been already installed, Uninstallation will be done. Click [Cancel] button, then uninstallation will be canceled. If you uninstalled the software by miss-operation, please re-install the software from first procedure.

5)After a moment, the Welcome dialog will appear as shown on the right. Press [Next].

6)The License Agreement dialog appears. If you accept it, select “I accept the terms of the license agreement” and press [Next].

7)The Choose Destination Location dialog appears. Press [Next].

NOTE • The C:\Program Files\Projector Tools\ LiveViewer3 folder will be created and the program will be installed into that folder. If you wish to install to a different folder, click [Browse] and select another folder.

24