SRS Labs 8953H user manual 119

6. Troubleshooting

6. Troubleshooting (Continued)

	Problem	Likely Cause	Things to Check	Reference
				Page
				Number
PC-	No information is		Select either Thumbnail
	shown after mass	The mode setting is not
LESS	storage device is	renewed after the device is	mode or Directory mode	104, 112
			again, showing PC-LESS
	set on Thumbnail or	set.	Presentation menu.
	Directory mode.
		The wireless network	Insert the wireless network
		card isn't inserted into the		*12
Wireless			card that came with your
		projector or the memory
			projector into the module.
		There is closely another
	Can’t communicate	card is still inserted.
		projector or other that has	Try changing of SSID and	70
			IP Address.	*60
		the same wireless setting.
		The PC and/or projector’s	Check both the PC and	11-14,
		network settings are not
			projector’s network settings.	41
Wired		configured correctly.
	Can’t communicate		Remove the SD wireless
LAN		The wireless network card	network card from the
			projector (you can’t use	*58
		is inserted into the projector.	both wireless and wired
			LAN connections at the
			same time).
Others		Communication between
- Information from the
		the projector and PC is not
projector to PC is not
		working well.	Try “MIU RESTART” in
correct or completed				*63
			SERVICE menu under the
- The projector does not		MIU Functions of the
			MIU menu.
respond
		projector is not working
- Image on screen is
		well.
frozen.
		* User’s Manual (detailed) - Operating Guide

119