3. Using the Live Mode
3.4 Passcode connection (continued)
n A network connection could not be established.
Windows prevented network configuration changes.
You may log in the Windows under User authority.
Click [OK], then the “Live Viewer 3” main menu is displayed even though the network is not established. Click 
on the main and go back to the item 3.3.3 Connecting to the network. (&31)
Consult to the network administrator. Log in the Windows under Administrator authority. After that, please resume at the item 3.3.1 Starting the “Live Viewer 3”. (26)
n Automatic connection failed.
The reason is that the IP address set in the projector is the global address.
Following the instruction by the network administrator, set the IP address and Subnet mask in the “Live Viewer 3”.
After input these address, click [Connect].
If you want to erase the information you input, click [Reset].
NOTE • If the IP address you input to the PC is the same as the one set in the projector, a warning message will come up. Please choose an IP address that is currently not in use.
35
