SRS Labs 8953H user manual Troubleshooting

6. Troubleshooting

6. Troubleshooting

	Problem		Likely Cause	Things to Check	Reference
					Page
					Number
			The projector is not turned	Is the projector’s lamp on?	*17
			on.
No image
			The projector’s input source	Is the projector switched to	*18
			isn’t switched to MIU.	MIU?
				Check both the PC and
				projector’s network settings.
				If you change the projector’
			The PC and/or projector’s	s settings, turn off the
		The projector		projector’s AC power and	10
		that you want	network settings are not	then turn it on again. If you
		to connect to	configured correctly.	simply put the projector in
		is nowhere		STANDBY power mode and
		to be found		then turn it on again, the
		on the list		new settings might not take
		of available		effect.
		projectors		• Bring the PC and projector
			Weak radio signal	closer together.	–
				• Radio waves won’t go
				through concrete and
				metal (steel doors, etc.)
Wireless/Wired	LiveMode		The Projector isn’t in Live	Check the mode on MIU	*55
				could not configure via
			Mode	menu to make sure that it is
				in the correct mode.
				In Windows 2000,WPA-
				PSK and WPA2-PSK
			WPA-PSK or/and WPA2-	LiveViewer 3. Use wireless	–
			PSK is not configure
				configuration utility with PC
			correctly in Windows 2000.
				or wireless adapter. Please
				refer the manual of your
		Can't		configuration utility.
		communicate		If there is a wireless
			Cannot communicate due	configuration utility loaded
				on your PC, check the	–
			to configure wireless /
				configuration settings of it.
			encryption settings
				Please refer the manual of
				your configuration utility.
			Configuration network	Be sure that the
				configuration settings of	10
			settings of LiveViewer may	LiveViewer are correct
			not be set correctly.	for usage with your PC or
				wireless adapter.
(continued on next page)			* User’s Manual (detailed) - Operating Guide

117