3.Using the Live Mode
3.5Manual configuration (continued)
Direct connection between the projector and PC (AdHoc mode)
1) Enter the following information that is set in the projector. *1
SSID: wireless (example)
Encryption: WEP64bit (example)
Encryption key *2: ********** (example)
Mode:
2)Click [Next].
3)Enter the following information that is set in the projector. *1
IP address : 192.168.1.10 (example)
Subnet mask: 255.255.255.0 (example)
4)Click [Connect].
5)The wireless connection will be established.
Proceed to the item 3.6 Confirm the connection to your destination. (50)
*1 To find the network setting on the projector, refer to the NOTE. (40)
*2 If you use an encryption, you need to set it. Contact the network administrator to find the encryption key that is set in the projector.
The encryption key is always shown as “**********”.
44
