
3. Using the Live Mode
3.2 Install “Live Viewer 3” (continued)
8)Confirm the program folder name. If “Projector Tools” is okay, press [Next] to continue. If not, enter the desired folder name and then press
[Next].
9)The Hardware Installation dialog appears. Press Continue Anyway.
NOTE • After sequence 8, the Windows Security dialog will appear if you are using Windows Vista. Please click the [Install this driver software anyway] and continue installation.
10)After a moment, installation will complete and the Setup Complete dialog will appear as shown on the right. Click [Finish]. This completes the software installation. Then your PC automatically restarts.
(1)To confirm that the software has been properly installed, press [Start] button on the toolbar, select All Programs and then select the Projector Tools folder.
(2)The “LiveViewer3” will appear in that folder if the installation was successful.
3.2.3 Version of the “Live Viewer ” software
To use the Live Mode, it is required to install the software, the “Live Viewer”, into the PC that is going to be connected to the projector through the network.
The right software version is depended on the models that you have. If the version is not matched with the projector, the software will not work properly.
|
|
|
| Models |
|
| |
Live Viewer |
|
|
|
|
|
| |
Version |
|
|
| CPX2 | |||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
2.01 |
| | Í |
| Í | Í | |
2.1x |
| Í | |
| | Í | |
2.20 |
| Í | |
| | Í | |
3.xx |
| Í | |
| | |
• “x” in the version means 0 or greater.
Please check and get the latest version at Hitachi Web site. http://hitachi.us/digitalmedia or http://www.hitachidigitalmedia.com
25