ADDITIONAL FEATURES FOR D.S.C.
To Reset The Number Of Prints
1 Perform steps 1 – 3 in “To Print All Still Images (One Print For Each)”.
2 Press 
or 
to select “RESET”, and press SET. The DPOF screen appears.
3 Press 
or 
to select “EXECUTE”, and press SET. The normal playback screen appears.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory card to be corrupted.
Initializing A Memory Card
You can initialize a memory card any time. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared.
1 Set the VIDEO/MEMORY Switch to “MEMORY”.
2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
3 Press MENU. The Menu Screen appears.
4 Press | or | to select |
| FORMAT | ||
“FORMAT”, and press | ERASE AL L | |||||
SET. The FORMAT | ||||||
EX I ST I NG DATA? | ||||||
screen appears. |
|
|
| |||
5 Press | or | to select |
|
|
| |
| EXECUTE | |||||
| RETURN | |||||
“EXECUTE”, and press |
| |||||
|
|
| ||||
SET. The memory card is initialized.
●When initialization is finished, “NO IMAGES STORED” or “NO
●To cancel initialization, select “RETURN”.
CAUTION:
Do not perform any other operation (such as turning off the camcorder) during initialization. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialization. If the memory card becomes corrupted, initialize it.
DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
