22 EN VIDEO PLAYBACK
Normal Playback
VIDEO/ | MENU |
| Power Switch | ||||
| 4/9/ |
|
|
|
| ||
MEMORY* |
|
|
|
|
| ||
|
| VOL. +/– | Lock Button | ||||
|
|
| |||||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shuttle Search
Allows
1)During playback, press 5 for forward search, or 3 for reverse search.
2)To resume normal playback, press 4/9.
●During playback, press and hold 5 or 3. The search continues as long as you hold the button. Once you release the button, normal playback resumes.
●A slight mosaic effect appears on the display during Shuttle Search. This is not a malfunction.
ATTENTION:
3 8/
5 SET
1 Load a cassette. ( pg. 17)
Speaker
During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.
2 Set the VIDEO/MEMORY Switch to “VIDEO”.*
3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
4 To start playback, press 4/9.
5 To stop playback, press 8.
●During Stop mode, press 3 to rewind, or 5
to
To control the speaker volume
Slide the Power Zoom Lever (VOL.
Blank Search
Helps you find where you should start recording in the middle of a tape to avoid time code interruption. ( pg. 21)
1
2 Set the VIDEO/MEMORY Switch to “VIDEO”.*
3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
NOTES:
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV.
( pg. 23)
●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.
●When a cable is connected to the AV connector, the sound is not heard from the speaker.
Still Playback
Pauses during video playback.
1)Press 4/9 during playback.
2)To resume normal playback, press 4/9 again.
4 Press MENU. The Menu Screen appears.
5 Press SET to select “t”. The VIDEO Menu appears.
6 Press 
or 
to select “BLANK SRCH”, and press SET. The Sub Menu appears.
7 Press 
or 
to select “EXECUTE”, and press SET.
●The “BLANK SEARCH” indication appears and the camcorder automatically starts reverse or forward search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.
●To cancel Blank Search midway, press 8.
*
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.
