54 EN EDITING
●The system may not work properly depending on the PC or capture board you are using.
For GR-DF470/450 owners:
“USB” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while “USB” is displayed on the LCD monitor since this can result in product damage.
*
Audio Dubbing
The audio track can be customized only when recorded in the
( pg. 37)
●Use the provided remote control.
Microphone Connector
| Speaker |
|
| START/ |
|
| STOP | Stereo Microphone |
| PAUSE | |
|
| |
REW | PLAY |
|
INSERT | STOP |
|
| A.DUB |
|
To hear the dubbed sound during playback
Set “NARRATION” to “ON” or “MIX”. ( pg. 36, 40)
NOTES:
●Sound is not heard from the speaker during Audio Dubbing.
●When editing onto a tape that was recorded at
●If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas.
●If feedback or howling occurs during TV playback, move the camcorder’s microphone away from the TV, or turn down the TV’s volume.
●If you change from
●During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded in
●Audio dubbing is also possible using an optional microphone connected to the MIC connector.
●While an optional microphone is connected, the
●To perform Audio Dubbing with a video unit connected to the camcorder’s AV connector, first set “S/AV INPUT” to “ON” in VIDEO Menu.
( pg. 36, 41)
The “AUX” indication appears instead of “MIC”.
1 Play back the tape to locate the point where editing will start, then press PAUSE (9).
2 While holding A. DUB (D) on the remote control, press PAUSE (9). The “9D” and “MIC” indicators appear.
3 Press PLAY (U), then begin “narrating”. Speak into the microphone.
●To pause dubbing, press PAUSE (9).
