JVC GR-DF450 instruction manual Using USB cable* B Using DV cable

EDITING EN 53

NOTES:

●If no image is displayed on the LCD monitor, set “S/AV INPUT” to “OFF”. ( pg. 36, 41)

●Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. ( pg. 37)

Connection To A Personal Computer

[A] Using USB cable* [B] Using DV cable

OR

To USB

	To DV IN/OUT
	Core filter
USB cable	DV cable
(provided)*
	(optional)
	Core filter
To USB	To DV connector
connector

PC PC with DV connector

* GR-DF470/450 only

When connecting the camcorder to a PC using a DV cable, make sure to follow the procedure below. Connecting the cable incorrectly may cause malfunctions to the camcorder and/or the PC.

●Connect the DV cable first to the PC, and then to the camcorder.

●Connect the DV cable (plugs) correctly according to the shape of the DV connector.

[A] Using USB cable (GR-DF470/450 only)

It is possible to do the following things:

●Transfer still images stored on a memory card to a PC.

●Transfer still/moving images recorded on a tape to a PC. (GR-DF470 only)

[B] Using DV cable

It is also possible to transfer still/moving images on a tape to a PC with a DV connector by using the provided software (GR-DF470 only), software equipped with the PC or commercially available software.

If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the Internet, using a camcorder. For details, refer to the help for the Windows® Messenger.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND PC CONNECTION GUIDE” for the bundled software and drivers.*

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 15)

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.*

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.*

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

ADVANCED FEATURES

CONTINUED ON NEXT PAGE