FEATURES FOR RECORDING EN 43
Night-Alive
Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.
1 Set the Power Switch to “M”.
2 Set “r” to “NIGHTALIVE”. ( pg. 47) The 
” appears.
●The shutter speed is automatically adjusted to provide up to 30 times sensitivity.
●“
” appears beside “
” while the shutter speed is being automatically adjusted.
To deactivate Night-Alive
Set “r” to “OFF” so that the Night-Alive indicator disappears.
NOTES:
●During
•Some modes of “Program AE With Special Effects” ( pg. 47).
•“GAIN UP” in CAMERA Menu ( pg. 37).
•“DIS” in MANUAL Menu ( pg. 38).
●During
Snapshot (For Video Recording)
This feature lets you record still images that look like photographs onto a tape.
1 Set the VIDEO/MEMORY Switch to “VIDEO”.*
2 Set the Power Switch to “M”.
3 Set “SNAP/SLOW” to the desired mode. ( pg. 36, 37) The Snapshot indicator “
” appears.*
4 Press SNAPSHOT.
●There is the sound effect of a shutter closing.
●The “O” indication appears and a still image will be recorded for approx. 6 seconds, then the camcorder
●You can perform Snapshot also during recording. A still image will be recorded for approx.
6 seconds, then the normal recording resumes.
●Regardless of the Power Switch position (“A” or “M”), Snapshot recording takes place using the selected Snapshot mode.
*
Motor Drive Mode
Keeping SNAPSHOT pressed in step 4 provides an effect similar to serial photography. (Interval between still images: approx. 1 second)
●The Motor Drive mode is disabled when “REC
SELECT” is set to “
/
”. ( pg. 40)
ADVANCED FEATURES
