OPERATION

MAKING CUTS

The blade provided with the saw is a high-quality combi- nation blade suitable for ripping and cross cut operations. Carefully check all setups and rotate the blade one full revolution to assure proper clearance before connecting to a power source.

WARNING:

Do not use blades rated less than the speed of this tool. Failure to heed this warning could result in personal injury.

Use the miter gauge when making cross, miter, bevel, and compound miter cuts. To secure the angle, lock the miter gauge in place by twisting the lock knob clockwise. Always tighten the lock knob securely in place before use.

NOTE: It is recommended that you place the piece to be saved on the left side of the blade and that you make a test cut on scrap wood first.

TO MAKE A CROSS CUT

See Figures 22 - 23.

WARNING:

Using the rip fence as a cutoff gauge when cross cutting will result in kickback which can cause serious personal injury. Never use the rip fence for any purpose when cross cutting.

WARNING:

Make sure the blade guard assembly is installed and working properly to avoid serious personal injury.

nRemove the rip fence by depressing the trigger lock and lifting the locking handle.

nTurn the height adjusting handwheel until the blade is set to the correct depth for the workpiece.

nSet the miter gauge to 0° and tighten the lock knob.

nPlace a support (the same height as saw table) behind the saw for the cut work.

nMake sure the wood is clear of the blade before turning on the saw.

nTurn the saw ON by lifting the switch button.

nTurn saw OFF by pressing the switch button down.

NOTE: To prevent unauthorized use, remove the switch key as shown in figure 23.

nLet the blade build up to full speed before moving the workpiece into the blade.

nHold the workpiece firmly against the miter gauge and feed the workpiece into the blade. Keep the workpiece flush against the miter gauge. Stand slightly to the side of the wood as it contacts the blade to reduce the chance

of injury should kickback occur. Keep the miter gauge firmly against the saw table as the workpiece is fed into the blade.

NOTE: The hand closest to the blade should be placed on the miter gauge lock knob and the hand farthest from the blade should be placed on the miter gauge and the workpiece.

nWhen the cut is made, turn the saw OFF. Wait for the blade to come to a complete stop before removing any part of the workpiece.

CROSS CUT

Fig. 22

SWITCH

ON

SWITCH

OFF

RESET

BUTTON

SWITCH

KEY

REMOVED

Fig. 23

23

Page 22 Page 24
Page 23
Image 23
Ryobi BTS10 manual To Make a Cross CUT, Cross CUT Switch OFF Reset Button
Page 22 Page 24

BTS10 specifications

The Ryobi BTS10 is a high-performance table saw designed for both amateur woodworkers and seasoned professionals. Known for its powerful motor and solid construction, this table saw offers a blend of precision and convenience, making it an excellent choice for various woodworking tasks.

One of the standout features of the BTS10 is its robust 15-amp motor, providing ample power to handle tough cutting jobs. This motor ensures that it can effectively rip through hardwoods and softwoods alike, delivering clean and accurate cuts. The tool has a no-load speed of 5000 RPM, allowing for quick and efficient cutting, which is particularly beneficial for large-scale projects.

The BTS10 comes equipped with a spacious 27-inch aluminum table that provides ample workspace, enhancing stability and control during cuts. The table’s surface is designed to be smooth, which minimizes friction and improves accuracy. Moreover, the saw features a cast iron trunnion system that enhances stability, further contributing to the precision of cuts.

For added convenience, the Ryobi BTS10 includes a built-in blade guard and anti-kickback pawls. These safety features are essential in preventing accidents and ensuring user safety during operation. Additionally, this model also incorporates an adjustable miter gauge, allowing users to make angled cuts easily. The miter gauge slides along the table’s slots for increased accuracy when making crosscuts.

The BTS10 also supports a bevel adjustment feature that allows users to tilt the blade up to 45 degrees. This capability is ideal for making bevel cuts, providing versatility for various woodworking applications. The blade height can also be adjusted easily using a convenient handwheel, enhancing user control over cut depth.

In terms of portability, the BTS10 is designed with user convenience in mind. Although it’s built for durability, it remains relatively lightweight, making it easier to transport to job sites or storage.

Overall, the Ryobi BTS10 table saw combines power, usability, and safety features, making it a versatile tool capable of handling a range of woodworking tasks. Whether you’re a hobbyist looking to expand your workshop or a professional seeking a reliable table saw, the BTS10 delivers the performance and features required for precision woodworking.
Top Page Image Contents