SPECIFIC SAFETY RULES

nNEVER perform any operation “freehand” which means using only your hands to support or guide the workpiece. Always use either the rip fence or miter fence to position and guide the work.

nNEVER stand or have any part of your body in line with the path of the saw blade.

nNEVER reach behind, over, or within three inches of the blade or cutter with either hand for any reason.

nMOVE THE RIP FENCE out of the way when cross cut- ting.

nDO NOT USE THE MITER GAUGE AND RIP FENCE during the same operation.

nNEVER use rip fence as cutoff gauge when cross cutting.

nNEVER attempt to free a stalled saw blade without first turning the saw OFF and disconnecting the saw from the power source.

nPROVIDE ADEQUATE SUPPORT to the rear and sides of the saw table for wide or long work pieces. Use a sturdy “outrigger” support if a table extension more than 24 inches long is attached to the saw.

nAVOID KICKBACKS (work thrown back toward you) by:

a)Keeping blade sharp.

b)Keeping rip fence parallel to the saw blade.

c)Keeping spreader, anti-kickback pawls, and blade guard in place and operating.

d)Not releasing the work before it is pushed all the way past the saw blade using a push stick.

e)Not ripping work that is twisted or warped or does not have a straight edge to guide along the fence.

n AVOID AWKWARD OPERATIONS AND HAND POSITIONS where a sudden slip could cause your hand

to move into the cutting tool.

nUSE ONLY RECOMMENDED ACCESSORIES listed in this manual or addendums. Use of accessories that are not listed may cause the risk of personal injury. Instruc- tions for safe use of accessories are included with the accessory.

nMAKE SURE THE WORK AREA HAS AMPLE LIGHTING to see the work and that no obstructions will interfere with safe operation BEFORE performing any work using the table saw.

nALWAYS TURN OFF SAW before disconnecting it, to avoid accidental starting when reconnecting to power supply.

nTHIS TOOL should have the following markings:

a)Wear eye protection.

b)Use saw blade guard and spreader/riving knife for every operation for which it can be used, including all through sawing.

c)Keep hands out of the line of saw blade.

d)Use a push stick when required.

e)Pay particular attention to instructions on reducing risk of kickback.

f)Do not perform any operation freehand.

g)Never reach around or over the saw blade.

nSAVE THESE INSTRUCTIONS. Refer to them frequently and use to instruct other users. If you loan someone this tool, loan them these instructions also.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

5

Page 4 Page 6
Page 5
Image 5
Ryobi BTS10 manual To move into the cutting tool
Page 4 Page 6

BTS10 specifications

The Ryobi BTS10 is a high-performance table saw designed for both amateur woodworkers and seasoned professionals. Known for its powerful motor and solid construction, this table saw offers a blend of precision and convenience, making it an excellent choice for various woodworking tasks.

One of the standout features of the BTS10 is its robust 15-amp motor, providing ample power to handle tough cutting jobs. This motor ensures that it can effectively rip through hardwoods and softwoods alike, delivering clean and accurate cuts. The tool has a no-load speed of 5000 RPM, allowing for quick and efficient cutting, which is particularly beneficial for large-scale projects.

The BTS10 comes equipped with a spacious 27-inch aluminum table that provides ample workspace, enhancing stability and control during cuts. The table’s surface is designed to be smooth, which minimizes friction and improves accuracy. Moreover, the saw features a cast iron trunnion system that enhances stability, further contributing to the precision of cuts.

For added convenience, the Ryobi BTS10 includes a built-in blade guard and anti-kickback pawls. These safety features are essential in preventing accidents and ensuring user safety during operation. Additionally, this model also incorporates an adjustable miter gauge, allowing users to make angled cuts easily. The miter gauge slides along the table’s slots for increased accuracy when making crosscuts.

The BTS10 also supports a bevel adjustment feature that allows users to tilt the blade up to 45 degrees. This capability is ideal for making bevel cuts, providing versatility for various woodworking applications. The blade height can also be adjusted easily using a convenient handwheel, enhancing user control over cut depth.

In terms of portability, the BTS10 is designed with user convenience in mind. Although it’s built for durability, it remains relatively lightweight, making it easier to transport to job sites or storage.

Overall, the Ryobi BTS10 table saw combines power, usability, and safety features, making it a versatile tool capable of handling a range of woodworking tasks. Whether you’re a hobbyist looking to expand your workshop or a professional seeking a reliable table saw, the BTS10 delivers the performance and features required for precision woodworking.
Top Page Image Contents