Clover Electronics LCD2084, LCD2088 instruction manual Timer Recording, should be turned on

6. How to Operate

The MOTION ( ) or SENSOR ( ) as shown in	[Fig. 6-30]should be turned ON in
this recording mode.

▫Press the RECORD button on the side panel or click the RECORD icon on the MENU window.

[Fig. 6-30 Manual Event Recording setup]

6-9.3. Timer Recording

▫Click the SETUP icon on the MENU window in the LIVE mode.

▫Click the RECORD button in the SETUP menu and then the RECORD window will be displayed.

▫Select the TIMER RECORDING () between the MANUAL RECORDING () and

the TIMER RECORDING (	) as shown in		[Fig. 6-31]. All channels can be set at
the same time by clicking the ALL (		) or each of the channels can be set by
clicking the TIMER RECORDING (		) on the CAM 1 through CAM 8.
The MOTION ( ) and SENSOR (		) as shown in		[Fig. 6-31]should be turned
OFF in this recording mode.

▫Choose one from SUNDAY to SATURDAY in the TIMER menu by clicking the mouse on

() that turns to (). You can choose the value or by repeatedly clicking the mouse.

▫Click the Hour (or Minute) button in [Fig. 6-33]to setup the Starting Time and Ending Time, then the Hour (or Minute) table will appear as shown in [Fig. 6-34].

-Click the Hour (or Minute) you wish to set up.

-The recording time can be set in military hour mode (24hour).

▫Press the RECORD button on the side panel or click the RECORD icon on the MENU window.

[Fig. 6-31 Timer Recording setup]

57