Clover Electronics LCD2084, LCD2088 instruction manual 109

7. Setup

▫Pre-Alarm Time Setup

Allows you to record a section of video just prior to Motion or Sensor activation. Click the mouse on the PRE in the MOTION menu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.

[Fig. 7-72 Pre-Record Time setup button]

▫Motion Hold Time Setup

The system continues recording for the MOTION HOLD TIME and finishes the recording. Click the mouse on the HOLD in the MOTION menu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.

[Fig. 7-73 Hold-Record Time Setup button]

▫Spot Setup

If the “ON” is selected by clicking the mouse on the SPOT button in the MOTION menu, a full screen will display when a motion is detected. If the “OFF” is selected, the full screen won’t be displayed even though motion of objects is detected.

[Fig. 7-74 Spot Setup button]

109