Clover Electronics LCD2088, LCD2084 instruction manual 118

Stand-alone DVR Instruction Manual

▫Pre-Alarm Time Setup

Allows you to record a section of video just prior to Sensor activation. Click the mouse on the PRE in the SENSOR menu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.

[Fig. 7-86 Pre-Alarm Time Setup button]

▫Alarm Hold Time Setup

The system continues recording for the Alarm HOLD TIME and finishes the recording. Click the mouse on the HOLD in the SENSOR menu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.

[Fig. 7-87 Alarm Hold Time Setup button]

▫Spot Setup

If the “ON” is selected by clicking the mouse on the SPOT button in the SENSOR menu, a full screen will display when the sensor is activated. If the “OFF” is selected, the full screen won’t be displayed even though the sensor is activated.

[Fig. 7-88 Spot Setup button]

▫Buzzer

Click the buzzer button in the SENSOR menu to turn the buzzer “ON” or “OFF”. If the “ON” is selected, the buzzer will sound when a sensor is activated. If the “OFF” is selected, the buzzer won’t sound.

[Fig. 7-89 Buzzer ON/OFF ]

118