Clover Electronics LCD2084, LCD2088 instruction manual Copy mode

8. REMOTE HOST PROGRAM

8-4.6. COPY

It is possible to copy the recorded data from the DVR system to a client PC by using the Copy button in [Fig. 8-13]in the Multi mode only (refer to section 8-4.9.2).

-Click the Copy button as shown in [Fig. 8-13]to copy the recorded data from the DVR system to a PC, and then the Copy Time Setup Window will be displayed.

-The copy data will be saved in the Backup Files (Open Windows Explorer – click My Computer – click Program Files – click DvrMaster folder – click Backup Files).

Copy Time Setup Window Copy button

[Fig. 8-13 Copy mode]

-Check the Start Time and End Time on the upper part of the Copy Time Setup Window and

click the Edit () button to set the Copy Start/End Time.

-Set the Copy Start/End Time in the Start/End Time Setting menu as shown in [Fig. 8-14]and click the OK button. Copying Start/End time setup can be possible within a recoding time extent.

-Select camera(s) you wish to copy by clicking “ALL” or camera channel number(s) in the Copy Time Setup Window.

147