7. Setup
7-6.3. All Motion ON / OFF, Sensitivity Setting
▫Click the 
button in the RECORD menu, then the ALL MOTION setup pop-up window will be displayed as shown in [Fig. 7-59].
▫By clicking the mouse, select the 
on the pop-up window (See [Fig. 7-59]) to enable the system to start recording by motion detection for all the channels.
▫By clicking the mouse, select the 
on the pop-up window (See [Fig. 7-59]) to disable the system to start recording by motion detection for all the channels.
▫By clicking the mouse, select the
on the pop-up window (See [Fig. 7-59]) and choose one of the sensitivity among LOW, 1, 2, 3 and HIGH for all the channels with the mouse’s wheel, and then click it to save.
▫See section 6-9.1 through 6-9.7 on page 56 through 60 for more information related to recording.
[Fig. 7-58 All Motion Setup button]
[Fig. 7-59 All Motion Setup pop-up window]
[Fig. 7-60 All Motion Sensitivity setup button]
