Setting
Display | Display |
This function decides whether to display
On | Show all the |
| this function when you want to project |
| images after the lamp becomes bright |
| enough. The factory default setting is |
| in this option. |
Countdown Off | Show the input image instead of |
| the countdown when turning on the |
| projector. Use this function when you |
| want to project the image as early as |
| possible even when the lamp is not |
| bright enough. |
Off | Hide the |
| |
| ●“Power off?” (p.25) |
| ●“No signal” for Power management |
| (p.55) |
| ●“Please wait ...” |
| ●Arrows for panning mode(p.47) |
Use the Point 7 8 buttons to switch between the options.
Standby mode
This function is available when operating the projector via network.
Normal ....... Supply the power to the network function even
after turning off the projector. You can turn on/ off the projector via network, modify network environment, and receive an
Eco............. Select “Eco” when you do not use the projector
via network. The projector’s network function will stop when turning off the projector.
Power management
For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period.
If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal” appears. It starts the countdown until the lamp is turned off. The countdown time can be set between
✔Note:
•When selecting “Normal”, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.
•When “Eco” is selected, several functions will be restricted. (pp. 17, 20- 22, 53, 55)
•When “Eco” is selected, all of the infrared remote receivers are activated regardless of the RC sensor setting. The projector may be effected the noise of the fluorescent light and so on.
Power management
Time left before the lamp is off.
54
