Sanyo PLC-XTC50L owner manual For zooming in and out the images, Digital zoom +

Screen Adjustment

For zooming in and out the images

Digital zoom +

Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +”appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

You can also enter the Digital zoom + mode by pressing the D.ZOOM button on the remote control.

Digital zoom –

Select Digital zoom –. The On-Screen Menu disappears and “D. zoom –” appears. Press the SELECT button to compress image size.

You can also enter the Digital zoom - mode by pressing the D.ZOOM button on the remote control.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM, SELECT, and Point buttons.

To return to the previous screen size, select a screen size from the Screen Menu or select an input source from the Input Menu (p.35) again, or adjust the screen size with the D.ZOOM buttons on the remote control.

✔Notes:

•The projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than that, lower the resolution before connecting to the projector.

•The image data other than 1024 x 768 is modified to fit the screen size in initial mode.

•True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.37).

•The panning function may not be operated properly if the stored Mode in the PC Adjust Menu is used (pp.38– 40).

•The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working.

•Digital zoom +/– cannot be selected when Full screen orTrue is selected.

•Wide cannot be selected when 720p, 1035i, or 1080i is selected in the PC System Menu (p.37).

•The minimum compression size is limited to Normal when Custom is selected.

47