Sanyo PLC-XTC50L owner manual Top Control

Part Names and Functions

Top Control

q

w e

r

o

!0

!1

t

!2

y !3

u

i

qWARNING TEMP.. indicator

–Lights red light when the projector detects an abnormal condition or the filter cartridge is not installed.

–Blinks red when the internal temperature of the projector exceeds the operating range (pp.66, 75).

wLAMP 1 REPLACE indicator

Turn yellow when the life of the projection lamp1 draws to an end. (pp.63-64, 74)

eSHUTTER indicator

Light blue when the shutter is closed. (pp.73-75)

rON/STAND-BY button

Turn the projector on or off (pp.24–25).

tINPUT button

Select an input source (pp.34–35).

yLENS button

Enter the focus, zoom, and lens shift adjustment mode (p.28).

uPOINT ed7 8 (VOLUME +/–) buttons

–Select an item or adjust the value in the On-Screen Menu (p.26).

–Pan the image in Digital zoom + mode (p.47).

–Adjust the volume level (Point 7 8 buttons) (p.29).

iSELECT button

–Execute the selected item (p.26).

–Expand or compress the image in the Digital zoom mode (p.47).

oWARNING FILTER indicator

–Blink slow when the filter is being scrolled (pp. 53, 73).

–Blink fast when the filter scroll is not working properly or the filter cartridge is not installed (pp.59-60, 75).

–Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.59-60, 75).

!0LAMP 2 REPLACE indicator

Turn yellow when the life of the projection lamp2 draws to an end. (pp.63-64, 74)

!1POWER indicator

–Light red while the projector is in stand-by mode.

–Light green during operations.

–Blink red during the cooling-off period.

–Blink green in the Power management mode or the Shutter management mode(p.56).

!2SHUTTER button

Close and open up the built-in shutter.(pp.28, 56)

!3MENU button

Open or close the On-Screen Menu (p.26).

13