Setting
Shutter
Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters.
Protection
Prohibits the shutter operation from the remote control and the projector's top control.
Remote control...Selecting "On" prohibits the shutter operation from the remote control.
Projector . . . . . ...Selecting "On" prohibits the shutter operation from the top control.
It is possible to prohibit the shutter operation from both of the remote control and the top control.
Management
The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The
Security (Key lock and PIN code lock settings)
This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation.
Key lock
This function locks the top control and remote control buttons to prevent operation by unauthorized persons.
..... Unlocked
..... Lock all the top control buttons
..... Lock the top control buttons except for
the
..... Lock all the remote control buttons. To
unlock, use the top control.
..... Lock the remote control buttons except for
the ON,
If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.
✔Note:
•The Factory default value is set to 180 minutes for the count down time.
•The Shutter Management function cannot be halted.
Key lock
Select Key lock. Use the Point ed buttons to choose one of the options and select [Yes] to activate it.
56