![](/images/new-backgrounds/1201640/20164025x1.webp)
Installer Menu
011 - KEY DEFEAT (Keyboard Defeat)
If set to 1, key defeat prevents the end user from accessing the on- screen menus with the display front
015 - SLEEP TIMER
If set to 1, the SLEEP TIMER feature may be used. If set to 0, the Sleep Timer is not available.
016 - EN TIMER (Enable On/Off Timers) *
If set to 1, Timer function is available to user and enabled continuous- ly. Set to 0 to disable On/Off Timers. (Clock must be set in order to use Timers.)
017 - ALARM *
Gives the installer the option of making the Alarm function available to the end user. If set to 1, Alarm function is available to end user. Set to 0 to disable the Alarm function.
NOTE: Clock must be set before the Alarm function will work.
021 - V-CHIP (Parental Control) *
Set to 1 to activate
022 - MAX BLK HRS (Maximum Block Hours) *
Sets hours from 0 to 99 for the maximum
023 - CAPTION LOCK
Set to 1 to restore previous caption On/Off state after turn Off. If set to 0, captions are always Off at turn On.
028 - CH. OVERIDE (Channel Override)
If set to 1, the user can select channels with either Channel up/down or by direct keypad entry. If set to 0, only those channels that are entered for scanning can be selected.
029 - OLD OCV (On Command VideoTM)
Set to 1 for operation with systems from On Command Corporation.
030 - ACK MASK
M.P.I. Communication Parameter. Leave at default setting unless changed by
* Only affects Function Menu if enabled by some PPV providers.
031 - POLL RATE
M.P.I. Communication Parameter. Selects Poll Rate for M.P.I. Leave at default setting unless changed by
032 - TIMING PULSE
M.P.I. Communication Parameter. Leave at default setting unless changed by
034 - CAMPORT EN. (Camera Port Enable)
Set to 1 to enable Video 2 input on display panel. If set to 0, Video 2 input on display panel is not functional.
NOTE:
035 - COMPPORT EN. (Computer Port Enable)
Enable/disables display panel HDMI1 input jack. Set to 0 to disable, set to 1 to enable DTV mode, set to 2 for PC mode.
NOTE: The setting above is ignored if Installer item 093 RJP AVAIL- ABLE, is set to 1.
038 - YPrPb EN. (Rear Component Video Enable)
Set to 1 to enable display panel rear Component Video input jacks. Set to 0 to disable display panel rear Component Video input jacks.
039 - REAR AUX EN. (Rear Aux Enable)
Set to 1 to enable display panel rear AUX (Video 1) input. Set to 0 to disable display panel rear AUX (Video 1) input. Note:
040 - AUTO CAMPORT
Set to 1 to automatically switch to Camport when equipment is con- nected to front Video input.
Set to 0 to disable front Video automatic source selection. NOTE: If set to 1, 093 RJP Available is automatically set to 0.
046 - STRT AUX SRCE (Start Aux Source)
Sets the starting AUX source. At power up, TV will tune to starting Aux source if item 004 Start Channel is set to 0.
If item 093 RJP Available is set to 0 and item
040 Auto Camport is set to 0: |
| |||
1 | = Video 1 | 4 | = RGB | 255 = Last Aux |
2 | = Video 2 | 5 | = HDMI 2 |
|
3 | = HDMI 1 | 6 | = Component |
|
If item 093 RJP Available is set at 1: |
| |||
2 | = Video 2 | 5 | = HDMI 2 | 6 = Component |
If item 040 Auto Camport is set to 1: |
| |||
1 | = Video 1 | 5 | = HDMI 2 |
|
3 | = HDMI 1 | 6 | = Component |
|
4 | = RGB |
|
|
|
P A G E 1 3 |