Installer Menu
Detailed Descriptions of Installer Menu Items
047 - AUX STATUS
Set to 1 for M.P.I. AUX source to be reported as a channel number instead of channel 0. Set to 0 to disable AUX identification change. Controls M.P.I. status channel response for AUX inputs.
053 - DIS. CH-TIME (Disable Channel-Time)
Set to 1 to disable the
Set to 0 to enable the
069 - EN.
070 - FOR.
0 | = Black | 3 | = Cyan | 6 | = Yellow |
1 | = Blue | 4 | = Red | 7 | = White |
2 | = Green | 5 | = Violet |
|
|
NOTE: If foreground and background color are the same, menu back- ground is transparent.
071 - BCK.
Set according to Color Chart. |
|
| |||
0 | = Black | 3 | = Cyan | 6 | = Yellow |
1 | = Blue | 4 | = Red | 7 | = White |
2 | = Green | 5 | = Violet |
|
|
NOTE: If foreground and background color are the same, menu back- ground is transparent.
073 - CH NOT AVBLE (Channel Not Available)
If set to 1 and item 028 CHANNEL OVERRIDE is set to 0, “NOT AVAIL- ABLE” message is displayed when directly accessing a channel not in the channel scan list available in memory.
075 - REVERT CH (Revert to Start Channel)
If set to 1 and loss of M.P.I. communication occurs, TV automatically tunes to the specified Start Channel.
078 - UPN MSB (UPN Most Significant Byte)
User programmable number, most significant byte readable by M.P.I. command. Note: Not linked to serial number.
079 - UPN MSB-1 (UPN Most Significant Byte-1)
User programmable number, most significant
080 - UPN MSB-2 (UPN Most Significant Byte-2)
User programmable number, most significant
081 - UPN LSB (UPN Least Significant Byte)
User programmable number, least significant byte readable by M.P.I. command. Not linked to serial number.
082 - CHKSM ERROR (Checksum Error) Enforces rigid M.P.I. checksum validation. Set to 1 for validation.
Set to 0 to disable (does not check checksum on M.P.I. async port). SPI is always checked.
083 - HANDSHK TIME (Handshake Time)
Adds an additional delay to the handshake time which is 64 msec, thus relaxing M.P.I. timing requirements to be compatible with PC based Windows controlled systems, range is 0 - 5.
(Timeout = 25.5MS + [25.5 MS* Handshake time]).
084 - PERMANENT BLK (Permanent Block)
Allows Lock (Parental Control) blocking schemes to be permanent by disabling the blocking hours function.
Set to 1 to install Parental Control restrictions permanently. Set to 0 for
087 - REAR RGB EN. (Rear RGB Enable) Controls access to rear RGB input on TV. Set to 0 to disable RGB input.
Set to 1 to enable RGB in DTV mode. Set to 2 to enable RGB in PC mode.
If set to 1 or 2, auto configuration is performed when RGB is selected or input change is detected.
Set to 17 to enable RGB in DTV mode. Set to 18 to enable RGB in PC mode.
If set to 17 or 18, auto configuration is done one time after a power cycle.
088 - EN NOISE MUTE (Enable Noise Mute)
If set to 1, audio mutes if no signal is present.
090 - KEY LOCK
If set to 1, display panel keyboard is locked out, not available to end user. IR receiver remains functional.
091 - YPrPb2 EN. (HDMI2 Enable)
Set to 0 to disable display panel HDMI2 input.
Set to 1 to enable DTV mode. Set to 2 to enable PC mode.
P A G E 1 4 |
