Installer Menu
Installer Menu Items 035 through 118
Menu Item | Function | Value Range | Default Value | Brief Description of Function and Comments |
|
|
|
|
|
035 | COMPPORT EN. | 0 / 2 | 1 | Set to 0 to disable HDMI 1. Set to 1 for DTV, set to 2 for PC. |
038 | YPrPb EN. | 0 / 1 | 1 | Set to 1 to enable display panel Component Video input jacks. |
039 | REAR AUX EN | 0 / 1 | 1 | Set to 1 to enable display panel Video 1 input jack. |
040 | AUTO CAMPORT | 0 / 1 | 1 | Set to 1 to automatically switch to Camport. |
046 | STRT AUX SRCE | Note 1 | 255 | Sets the starting AUX source. |
047 | AUX STATUS | 0 / 1 | 0 | Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0. |
053 | DIS. | 0 / 1 | 0 | Set to 1 to disable |
069 | EN. | 0 / 1 | 1 | Set to 1 to enable custom color for the |
070 | FOR. | 0 ~ 7 | 2 | Chooses custom foreground color for the |
071 | BCK. | 0 ~ 7 | 2 | Chooses custom background color for the |
073 | CH NOT AVBLE | 0 / 1 | 0 | If set to 1 and channel override is 0, “NOT AVAILABLE” message is displayed |
|
|
|
| when directly accessing a channel not in the TV memory channel list. |
075 | REVERT CH | 0 / 1 | 0 | If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel. |
078 | UPN MSB | 0 ~ 255 | 0 | User programmable number, most significant byte. |
079 | UPN | 0 ~ 255 | 0 | User programmable number, most significant byte - 1. |
080 | UPN | 0 ~ 255 | 0 | User programmable number, most significant byte - 2. |
081 | UPN LSB | 0 ~ 255 | 0 | User programmable number, least significant byte. |
082 | CHKSM ERROR | 0 / 1 | 1 | Enforces rigid M.P.I. checksum. |
083 | HANDSHK TIME | 0 ~ 5 | 5 | Relaxes M.P.I. timing to be compatible with PC based |
084 | PERMANENT BLK | 0 / 1 | 0 | Removes block hours setting for Parental Control and makes block permanent. |
087 | REAR RGB EN. | 0, 1, 2, | 2 | Set to 0 to disable RGB1. Set to 1 to enable for RGB DTV mode. Set to 2 to enable for RGB PC. |
|
| 17, 18 |
| Set to 17 for one time auto configuration in DTV mode. |
|
|
|
| Set to 18 for one time auto configuration in PC mode. |
088 | EN NOISE MUTE | 0 / 1 | 1 | If set to 1, mutes audio if no signal is present. |
090 | KEY LOCK | 0 / 1 | 0 | If set to 1, keyboard is locked out, IR is still functional. |
091 | YPrPb2 EN. | 0 / 2 | 1 | Set to 0 to disable HDMI 2. Set to 1 for DTV, set to 2 for PC. |
093 | RJP AVAILABLE | 0, 1, 2, 5, 6 | 0 | Set to 0 to disable. Set to 1, 2, 5 or 6 for HDMI or DVI mode. (See detailed descriptions) |
094 | SAP MENU EN | 0 / 1 | 1 | Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu. |
096 | DEF. ASP. RATIO | 0 ~ 5 | 2 | Sets default aspect ratio at power up. See detailed descriptions and item 106. |
099 | BACK LIGHTING | 1 ~ 100 | 100 | Sets the power saving mode by controlling the brightness of the picture. |
|
| 101 ~ 200 |
|
|
102 | ATSC BAND | 0 ~ 4 | 4 | Selects ATSC band. |
103 | ATSC TUNE MODE | 0 / 1 | 1 | Default 01 for physical channel scan. Set to 0 for Virtual Channel scan. |
104 | START MINOR CH | 0 ~ 255 | 0 | Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number. |
106 | ASP RATIO LOCK | 0 / 1 | 0 | To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle. |
116 | VIDEO MUTE EN | 0 / 1 | 0 | Set to 0 for normal, set to 1 for Blank. |
117 | FACT DEFAULT | 0 / 1 | 0 | 0=Normal. 1=Loads presets of all above settings. |
|
|
|
|
|
|
|
|
|
|
Note 1: Dependent on item 093 RJP Available setting.
P A G E 1 1 |
