Configuration Menu (continued)
Item | Values | Explanation |
|
|
|
PRINT PS ERRORS= | OFF | Select ON to print the PS error page when PS |
OFF | ON | errors occur. |
|
|
|
RAM DISK=AUTO | OFF | Determine how the RAM disk is configured. |
| ON | This item appears only if there is no optional |
| AUTO | hard disk accessory installed and the printer |
| has at least 16 MB of memory. | |
|
| |
|
| OFF: The RAM disk is disabled. |
|
| ON: The RAM disk is enabled. Configure the |
|
| amount of memory to be used through the |
|
| following item: RAM DISK SIZE. |
|
| Note |
|
| If the setting is changed from OFF to ON or from |
|
| OFF to AUTO, the printer will automatically |
|
| reinitialize when it becomes idle. |
|
|
|
QUICK COPY | 1 to 50 | Specifies the number of quick copy jobs that |
JOBS=32 |
| can be stored on the printer’s hard disk |
|
| accessory. |
|
|
|
HELD JOB | OFF | Sets the amount of time that held jobs are kept |
TIMEOUT=OFF | 1 HOUR | before being automatically deleted from the |
| 4 HOURS | queue. |
|
| |
| 1 DAY |
|
| 1 WEEK |
|
PERSONALITY= AUTO
AUTOPCL PS
Select the default printer language (personality). Possible values are determined by which valid languages are installed in the printer.
Normally you should not change the printer language (the default is AUTO). If you change it to a specific printer language, the printer will not automatically switch from one language to another unless specific software commands are sent to the printer.
EN | Configuration Menu 221 |