5 
1 
2 
6 
7 
8 
5Remove the rear output bin and extension. To do this, bend the middle down slightly, release tab 1 and then release tab 2.
6Unlock the fuser by rotating the blue fuser levers so that they point up.
7Pull the fuser out of the printer. To release the fuser from the printer, hold the back of the printer while pulling on the fuser. Do not pull on the black plastic flapper.
8Remove the paper that has jammed.
CAUTION
Do not use a sharp object to clear paper from the fuser area. You might damage the fuser.
Continued on the next page.
108 Chapter 4 - Problem solving | EN |