9 
10
11
9Replace the fuser, left side first. Be sure to push the fuser firmly into the printer.
10Lock the fuser in place by rotating the levers to the horizontal position.
11Replace the rear output bin, left side first.
12Plug the power cord into the printer.
13Replace the tray 2 dust cover or the optional duplexer.
14Turn the printer back on.
15If a paper jam message persists, there is still paper in the printer. Look for paper in another location (see “Paper jam locations” on page 97).
Note
Since the printer has been turned off, you will need to send the print job again.
EN | Clearing paper jams 109 |