HP 4100N, 4100TN manual Installing EIO cards/mass storage

Installing EIO cards/mass storage

Follow this procedure to install an EIO card or mass storage device:

1Turn the printer off.

2Remove the two screws and cover plate from the EIO 1 or EIO 2 slot on the back of the printer.

3Install the EIO card or mass storage device in the EIO slot and tighten the screws. See the figure below for orientation of the EIO card.

	4 Turn the printer on and print a configuration page to verify that the
	new EIO device is recognized (see “Configuration page” on
	page 152).
Note	For information on connecting an EIO card to a network and installing
	the network software, see “Printer software” on page 33 and also the
	getting started guide that came with the printer.
	Use HP Resource Manager to manage fonts on a mass storage
	device (see “HP Resource Manager” on page 37). For more
	information, see the printer driver online help.
	HP is constantly introducing new software tools for use with your
	printer and accessories. These tools are available from the Internet
	free of charge. See “Online services” on page 157 for how to visit the
	HP website for more information.

EN Installing EIO cards/mass storage 233