HP 4100N Input Device, Condition, Install Toner, Cartridge, Loading, Manually Feed, Memory Full

Printer messages (continued)

Message	Explanation or recommended action
INPUT DEVICE	An input paper handling device has a condition that needs attention
CONDITION	before printing can resume.
[xx.yy]	Turn the printer off.
	Disconnect the cable to the input paper handling devices and then
	reconnect it.
	Turn the printer on.
	See the documentation that came with the paper handling device for
	assistance.
INSTALL TONER	The toner cartridge has been removed and must be reinstalled for
CARTRIDGE	printing to continue.
INSTALL TRAY [x]	The specified tray is not installed and must be inserted and closed
	for printing to continue.
LOADING	Programs and fonts can be stored on the printer’s file system. At
PROGRAM <number>	bootup time, these entities are loaded into RAM. (These entities can
alternates with	take a long time to load into RAM depending on the size and number
	of entities being loaded.) The <number> specifies a sequence
DO NOT POWER OFF	number indicating the current program being loaded.
MANUALLY FEED	Load the requested paper into tray 1.
[TYPE] [SIZE]	Press GO if the desired paper is already loaded in tray 1.
MEMORY FULL	There is no available memory in the printer. The current job might not
STORED DATA LOST	print correctly and some resources (such as downloaded fonts or
	macros) might have been deleted.
	Consider adding more memory to the printer (see “Printer memory
	and expansion” on page 229).
MEMORY SETTINGS	The printer changed its memory settings because it did not have
CHANGED	enough memory to use the previous settings for I/O Buffering and
	Resource Saving. This usually occurs after removing memory from
	the printer, adding a duplexer, or adding a printer language.
	Consider adding more memory to the printer (see “Printer memory
	and expansion” on page 229).
MEMORY SHORTAGE	The printer did not have enough free memory to print the entire job.
JOB CLEARED	The remainder of the job will not print and will be cleared from
	memory.
	Press GO to continue.
	Consider adding more memory to the printer (see “Printer memory
	and expansion” on page 229).

EN Understanding printer messages 115