HP 4100TN manual Dimension=, Inches, Millimeters, ORIENTATION= Portrait, Portrait Landscape, Lines

Printing Menu (continued)

Item	Values	Explanation
UNIT OF	INCHES	This item appears only when CONFIGURE
MEASURE=INCHES	MILLIMETERS	CUSTOM PAPER=YES. Select the unit of
(110V printers)		measurement for the custom paper size.
or
MILLIMETERS
(220V printers)
X DIMENSION=	For supported paper	This item appears only when CONFIGURE
8.50 INCHES	sizes, see	CUSTOM PAPER=YES. Use -VALUE+and
(110V printers)	“Supported sizes	SELECT to select the dimension to be fed
or	and weights of	into the printer (short edge) for custom
	paper” on page 189.	paper size.
216 MILLIMETERS
(220V printers)
Y DIMENSION=	For supported paper	This item appears only when CONFIGURE
14.00 INCHES	sizes, see	CUSTOM PAPER=YES. Use -VALUE+and
(110V printers)	“Supported sizes	SELECT to select the other dimension (long
or	and weights of	edge) for custom paper size.
	paper” on page 189.
356 MILLIMETERS
(220V printers)
ORIENTATION=	PORTRAIT	Determine the default orientation of print on
PORTRAIT	LANDSCAPE	the page.
		Note
		It is best to set the page orientation from the
		printer driver or software application.
		(Driver and software settings override
		control panel settings.)
FORM LENGTH=	5 to 128	Sets vertical spacing from 5 to 128 lines for
60 LINES		default paper size. Press -VALUE+once to
(110V printers)		change the setting by increments of 1, or
or		hold down -VALUE+to scroll by increments
		of 10.
64 LINES
(220V printers)

PCL FONT SOURCE=	INTERNAL
INTERNAL	SOFT
		1, 2, or 3
	SLOT

INTERNAL: Internal fonts.

SOFT: Permanent soft fonts.

SLOT 1, 2, or 3: Fonts stored in one of the three DIMM slots.

Note

It is best to set the font source from the printer driver or software application. (Driver and software settings override control panel settings.)

214 Appendix B - Control panel menus EN