EIO Menu (continued)
Item | Values | Explanation |
|
|
|
CFG IPX/SPX=NO | NO | Select whether you want to access the IPX/ |
| YES | SPX menu and set IPX/SPX protocol |
|
| parameters. |
|
| NO: Bypass the IPX/SPX menu items. |
|
| YES: Access the IPX/SPX menu items. |
|
| In the IPX/SPX menu, you can specify the |
|
| frame type parameter used on your network. |
|
| The default is AUTO, to automatically set and |
|
| limit the frame type to the first one detected. |
|
| For Ethernet cards, frame type selections |
|
| include EN_8023, EN_II, EN_8022, EN_SNAP. |
|
| For Token Ring cards, frame type selections |
|
| include TR_8022, TR_SNAP. |
|
| In the IPX/SPX menu for Token Ring cards, you |
|
| can also specify NetWare Source Routing |
|
| parameters, which include SRC RT=AUTO |
|
| (default), OFF, SINGLE R, or ALL RT. |
|
|
|
CFG TCP/IP=NO | NO | Select whether you want to access the TCP/IP |
| YES | menu and set TCP/IP protocol parameters. |
|
| NO: Bypass the TCP/IP menu items. |
|
| YES: Access the TCP/IP menu items |
|
| In the TCP/IP Menu, you can specify |
|
| BOOTP=YES or DHCP=YES for TCP/IP |
|
| parameters to be automatically loaded from a |
|
| bootP or DHCP server when the printer is |
|
| turned on. |
|
| If you specify BOOTP=NO and DHCP=NO, you |
|
| can manually set the following TCP/IP |
|
| parameters from the control panel: each byte |
|
| of the IP address (IP), Subnet Mask (SM), |
|
| Syslog Server (LG), and Default Gateway |
|
| (GW). You can also manually set the Idle |
|
| Timeout time period. |
|
| Print an HP JetDirect configuration page to |
|
| verify your settings. However, note that the print |
|
| server might overwrite selected parameters |
|
| with values that ensure proper operation. |
226 Appendix B - Control panel menus | EN |