Printing labels

Use only labels recommended for use in laser printers. Make sure that labels meet the correct specifications (see “Labels” on page 196).

Do:

●Print a stack of up to 50 labels from tray 1 or a stack of 50 to 100 labels from other trays.

●Load labels in tray 1 with the side-to-be-printed facing up, and the top, short edge toward the printer. For other trays, load paper with the side-to-be-printed facing down, and the top edge toward you.

●Try opening the rear output bin to reduce curl and other problems (see “Printing to the rear output bin” on page 45).

Do not:

●Do not load the trays to capacity because labels are heavier than paper.

●Do not use labels that are separating from the backing sheet, wrinkled, or damaged in any way.

●Do not use labels that have the backing sheet exposed. (Labels must cover the entire backing sheet with no exposed spaces.)

●Do not feed a sheet of labels through the printer more than once. The adhesive backing is designed for only one pass through the printer.

●Do not print on both sides of labels.

●Do not print on sheets from which labels have been removed.

CAUTION Failure to follow these instructions can damage the printer.

EN

Printing special paper 61