1
2
3
Loading envelopes in tray 1
1Open tray 1, but do not pull out the extension. (Most envelopes feed best without the extension. However, oversize envelopes might need the extension.)
2Load up to 10 envelopes in the center of tray 1 with the
3Adjust the guides to touch the envelope stack without bending the envelopes. Make sure the envelopes fit under the tabs on the guides.
Note
If envelopes curl, use the rear output bin (see “Printing to the rear output bin” on page 45).
56 Chapter 2 - Printing tasks | EN |