HP 4100TN, 4100N Simplified, Detected, Continue Offline, Output BIN Full, Binname, Not Available

Printer messages (continued)

Message		Explanation or recommended action
MEMORY SHORTAGE		The printer had to compress the job in order to fit it in available
PAGE SIMPLIFIED		memory. Some data loss might have occurred.
		Press GO to continue.
		The print quality of these pages may not be acceptable. Reduce the
		complexity of these pages and reprint them.
		Consider adding more memory to the printer (see “Printer memory
		and expansion” on page 229).
NON HP TONER		The printer has detected that the toner cartridge is not a genuine HP
DETECTED		toner cartridge. If you believe you purchased an HP toner cartridge,
alternates with		call the HP fraud hotline (see “HP fraud hotline” on page 161). Any
		printer repair required as a result of using non-HP toner is not covered
PRESS GO TO		under the printer warranty.
CONTINUE
OFFLINE		Press GO to place the printer online.
OUTPUT BIN FULL		The output bin is full and needs to be emptied.
alternates with
CLEAR PAPER FROM
[BINNAME	]
PAPER WRAPPED		Turn the printer off to keep the paper from wrapping more firmly
AROUND FUSER		around the fuser. Open the top cover and remove the toner cartridge.
		Remove all visible paper. If you cannot locate the paper, leave printer
		turned off and remove the fuser to remove paper (see “Clearing jams
		from the fuser area” on page 107).

PERFORM PRINTER MAINTENANCE

To ensure optimum print quality, the printer prompts you to perform routine maintenance every 200,000 pages. (To order a printer maintenance kit, see “Ordering information” on page 22. For information on maintenance, see “Performing preventative maintenance” page 93.)

PRINTER LANGUAGE	A print job requested a printer language that does not exist in the
NOT AVAILABLE	printer. The job will not print and will be cleared from memory.
	Print the job using a driver for a different printer language, or add the
	requested language to the printer (if available).
	Press GO to continue.
PROCESSING AUTO	The printer is conducting the auto cleaning page process. This can
CLEANING PAGE	take up to 2.5 minutes.
PROCESSING	The printer is conducting the manual cleaning page process. This can
CLEANING PAGE	take up to 2.5 minutes.
RAM DISK DEVICE	The RAM disk had a critical failure and can no longer be used.
FAILURE

116 Chapter 4 - Problem solving EN