Samsung NE595R0ABWW Maintaining your appliance, Self-Cleaning, Before a self-cleaning cycle

maintaining your appliance

SELF-CLEANING

This self-cleaning oven uses high temperatures (well above cooking temperatures) to burn off leftover grease and residue completely or reduce them to a finely powdered ash that you can wipe away with a damp cloth.

	• During the self-cleaning cycle, the outside of the range will become very hot to the
CAUTION	touch. Do not leave small children unattended near the appliance.

•Some birds are extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well-ventilated room.

•Do not line the oven walls, racks, bottom, or any other part of the range with aluminum foil. Doing so will result in poor heat distribution, poor baking results, and cause permanent damage to the oven interior. Aluminum foil will melt and adhere to the interior surface of the oven.

•Do not force the oven door open. This can damage the automatic door locking system. Use care when opening the oven door after the self-cleaning cycle is complete. Stand to the side of the oven when opening the door to allow hot air or steam to escape. The oven may still be VERY HOT.

Before a self-cleaning cycle

Fig. 1		• We recommend venting your kitchen with an open window
		or using a ventilation fan or hood during the self-cleaning
		cycle.
		• Remove the wire rack, broil pan, broil pan insert, all
		cookware, and any aluminum foil from the oven.
		• Wipe up debris from the oven bottom. (Fig. 1)
		• The silver-colored oven racks can be self-cleaned, but they
		will darken, lose their luster, and become hard to slide.
		• Residue on the front frame of the range and outside the
		gasket on the door will need to be cleaned by hand. Clean
Fig. 2	Don’t hand	these areas with hot water, soap-filled steel-wool pads, or
		cleansers such as Soft Scrub. Rinse well with clean water
	clean the
		and dry.
	oven door
	gasket.	• Do not clean the gasket. The fiberglass material of the oven
		door gasket cannot withstand abrasion. It is essential for
		the gasket to remain intact. If you notice it becoming worn
		or frayed, replace it. (Fig. 2)
		• Make sure the oven light bulb cover is in place and the
	You may	oven light is off.
	hand clean
	the door.

MAINTAINING YOUR APPLIANCE

Maintaining your appliance _44

NE595R0ABSR_AA_DG68-00433A-04_EN.indd 44 2013-05-23 �� 5:05:28