Fisher & Paykel CI365DT installation instructions Clearance and cabinetry dimensions

Installation instructions

Clearance and cabinetry dimensions

9US CA

	F		G
	A		WARNING!
E		B	This cooktop requires
			adequate supply of fresh,
			cool air to fully function.
D			The base of the cooktop
C			must have direct
			unrestricted ventilation to
			the room where the
			cooktop is installed. Follow
H	C	J	the requirements below.
			2x 2” (50mm)
			holes to allow
			adequate cool air

I

Clearance and cabinetry dimensions (inches (mm))

CI365DT

A	minimum clearance from rear edge of cutout to:	2 3⁄16” (55)
	nearest combustible surface
B	minimum clearance from glass surface to:
	overhead cabinet centered above the cooktop (unprotected)*	30 ” (762)
	overhead cabinet centered above the cooktop (protected)*	24 ” (610)
C	minimum clearance from side edges of cutout to:
	nearest combustible surface	3 3⁄16” (80)
D	minimum distance from front edge of cutout to:
	front edge of counter	13⁄8” (35)
E	minimum clearance from countertop to:
	overhead cabinet not directly above the cooktop	18” (457)
F	minimum distance between cabinets either side of the cooktop	36” (915)
G	maximum depth of overhead cabinetry	13” (330)
H	minimum clearance below top of countertop to:
	top of oven installed below cooktop (see Fig.1 and Note #3 following)	4¾” (120)
	top of drawer or other obstruction below cooktop (see Fig.2)	4¾” (120)
I	maximum distance from right edge of cutout to center of junction box	30” (762)
J	minimum clearance below top of countertop to junction box	9” (230)

* See Notes #1 and #2 following.

** This is to allow for adequate slack in the 4’ conduit fitted on the cooktop.