Fisher & Paykel CI365DT installation instructions Us Ca

US CA

10

Installation instructions

Clearance and cabinetry dimensions cont.

Notes:

#1 To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a rangehood that projects horizontally a minimum of 5 “ (127 mm) beyond the bottom of the cabinets.

#2 B=30” (762 mm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet; or B=24” (610 mm) minimum when bottom of wood or metal cabinet is protected by not less than ¼-inch-thick flame-retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015-inch-thick stainless steel, 0.024-inch-thick aluminum, or 0.020-inch-thick copper.

#3 The oven installed below the cooktop MUST have a cooling fan.

H

H

3⁄16”(4 mm)

Top of drawer or other obstruction

3⁄16”(4 mm)

2x 2” (50mm) holes to allow adequate cool air

Oven with cooling fan

1911⁄16” x 2” (500 x 50 mm)

2x 2” (50mm) holes to allow adequate cool air

1911⁄16” x 3⁄8” (500 x 10 mm)

1911⁄16” x 3⁄8” (500 x 10 mm)

Fig. 1 Minimum clearances and ventilation requirements - oven installed below cooktop

Fig. 2 Minimum clearances and ventilation requirements - drawer or other obstruction below