Chassis Intrusion Switch Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated. The system will re- cord this status and show a warning message on the screen. To clear the warn- ing, you must enter the BIOS utility and clear the record.
GND
CINTRU
IPMB Connector: J_IPMB1
This connector is used to connect the IPMB (Intelligent Platform Management Bus) SMBus.
1
PIN | SIGNAL |
1SMB_IPMB_5VSB_DAT
2GND
3SMB_IPMB_5VSB_CLK
