MSI MS-91F7 Serial ATA Connector SATA0 ~ SATA5, Fan Power Connector CPUFAN0/1, SYSFAN1/2/3

▍Hardware Setup

Connector

Serial ATA Connector: SATA_0 ~ SATA_5

This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device.

Important

Please do not fold the SATA cable into a 90-degree angle. Otherwise, data loss may occur during transmission.

Fan Power Connector: CPUFAN0/1, SYSFAN1/2/3

The fan power connectors support system cooling fan with +12V. When con- necting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset onboard, you must use a specially designed fan with speed sensor to take ad- vantage of the CPU fan control.

1	PIN	SIGNAL
	1	GND
4	2	+12V
	3	Sensor
	4	Control

Important

Please refer to the recommended CPU fans at processor’s official website or consult the vendors for proper CPU cooling fan.

2-10