▍Hardware Setup
Front Panel Connector: JFP1, JFP2
The front panel connector is provided for electrical connection to the front panel switches and LEDs.
2 | 24 |
1 | 23 |
PIN | SIGNAL |
1 | POWER LED+ |
2 | FRONT PANEL POWER |
3 | KEY |
4 | SYS ID LED+ |
5 | POWER LED- |
6 | SYS ID LED- |
7 | HDD ACT LED+ |
8 | SYS FAULT LED1- |
9 | HDD ACT LED- |
10 | SYS FAULT LED2- |
11 | POWER SWITCH |
12 | NIC#1 ACT LED+ |
13 | POWER SWITCH GND |
14 | NIC#1 ACT LED- |
15 | RESET SWITCH |
16 | SMB SDA |
17 | RESET SWITCH GND |
18 | SMB SCL |
19 | SYS ID SWITCH |
20 | CHASSIS INTRUSION |
21 | WIRE TEMP SENSOR |
22 | NIC#2 ACT LED+ |
23 | NMI SWITCH |
24 | NIC# 2 ACT LED- |
2 | 8 |
1 | 7 |
PIN | SIGNAL |
1 | GND |
2 | SPEAKER |
3 | POWER LED |
4 | SPEAKER |
5 | POWER LED |
6 | SPEAKER |
7 | KEY |
8 | SPEAKER |
