Western Telematic RMM-288 manual Command Summary, Command Function/Options

RMM Rack Mount Modem; User's Guide

UP Dumb Mode: Disables command recognition

X DOWN Smart Mode: Enables command recognition

5.Command Summary

●Type commands in either upper or lower case. Do not use a combination of upper and lower case characters.

●Use the Backspace key to delete errors. Note that the original AT command is stored in the modem buffer, and cannot be deleted.

●Some commands have numeric options. If these commands are invoked without a numeric option, the modem will assume option 0 (zero). For example, when the command ATB is invoked, the modem will assume command ATB0 was intended.

●All commands begin with the AT prefix, and are invoked by pressing [Enter] (Carriage Return). The only exceptions are the A/ command (Repeat previous command) and +++ (Exit to on-line command mode).

●The maximum command length is 40 characters. This does not include the AT prefix, Carriage Returns, or spaces.

Note: Default values are marked with an asterisk. All defaults are based on the &F1-Hardware Flow Control Template loaded in NVRAM.

Command Function/Options

$ Displays basic command list (On-line Help Menu).

AManual Answer: goes off hook in answer mode. Pressing any key aborts the operation.

A/	Re-executes the last issued command. Used mainly to redial. Does not require
	the AT prefix or a Carriage Return.
Any Key	Aborts off-hook dial/answer operation and hangs up.
AT	Required prefix for all modem commands. Can also be used to test for the OK
	result code. Not required for the A/ command or +++ command.
Bn	U.S./ ITU-T answer sequence
	* B0	ITU-T answer sequence
	B1	U.S. answer tone
Dn	Dials the specified phone number. Can also include the following command
	options:
	DL	Re-dials last number dialed

file:///C/WEBPAGE/guides/rmm/rmm_manl.htm (6 of 21) [2/7/2000 10:55:43 AM]