Users Guide, Table of Contents | Western Telematic RMM-288 instruction

RMM Rack Mount Modem; User's Guide

WTI Part No.: 12548

Rev. F

Rack Mount Data/Fax Modem

User's Guide

5 Sterling, Irvine, California 92618-2517

U.S. and Canada: 1-800-854-7226

Phone: (949) 586-9950

Fax: (949) 583-9514

http://www.wti.com

●1. Introduction

●2. Unit Description

❍2.1. Front Panel Indicators

●3. Operation

●4. Installation

❍4.1. 48 Volt DC Power Option

❍4.2. Dip Switch Settings

●5. Command Summary

file:///C/WEBPAGE/guides/rmm/rmm_manl.htm (1 of 21) [2/7/2000 10:55:42 AM]

Image 1

Contents

Users Guide Table of Contents Unit Description IntroductionStatus Meaning Operation BAUD=9600 PARITY=N WORDLEN=8 DIAL=PULSE on Hook Installation Switch Factory Function Command Function/Options Command Summary Originates call using answer reverse frequencies Pulse Rotary Dial Mode Result Codes Sets result code displayed. The default is Requires @ in dial string replaces no Carrier Connect Controls Carrier Detect CD signal Fixed in ARQ mode, variable in non-ARQ modeSwitch DTR override DTR toggle causes online Command Mode V42BIS/MNP5 data compression Loads a read-only non-programmable factory configuration Resets on receipt of DTRHz guard tone some European countries requires B0 setting Hz guard tone U.K. requires B0 setting RMM Rack Mount Modem Users Guide Remote Digital with self test and error detector Enables Remote Digital LoopbackAnalog Loopback with self test and error detector Modem controls DSR Registers Register Default Function Bit Value Result Disable ARQ/MNP for .22 bis Disable ARQ/MNP forDisable ARQ/MNP for V.32 / V.32bis Disable MNP handshake Originates V.21 calls Default Bell Enables ITU-T V.21 modulation at 300 bpsEnables un-encoded non-trellis coded Modulation in V.32 mode Enable V.8 mode Enable V.8 Call IndicateDisable V.34 modulation Disable 33.6 Kbps support Specifications Power Customer ServiceRinger Equivalence 0.9 B January Part Number 12548 Revision F