RMM Rack Mount Modem; User's Guide
| &S1 | Modem controls DSR |
&Tn | Begins test modes | |
| &T0 | Ends test in progress |
| &T1 | Analog Loopback |
| &T2 | Reserved |
| &T3 | Local Digital Loopback |
| &T4 | Enables Remote Digital Loopback |
| * &T5 | Prohibits Remote Digital Loopback |
| &T6 | Initiates Remote Digital Loopback |
| &T7 | Remote Digital with self test and error detector |
| &T8 | Analog Loopback with self test and error detector |
&Un | Sets floor connect speed when &Un is greater than 0 (zero). &Nn is the | |
| ceiling connect speed (See also &Nn). | |
*&U0 Disabled
&U1 300 bps
&U2 1200 bps
&U3 2400 bps
&U4 4800 bps
&U5 7200 bps
&U6 9600 bps
&U7 12,000 bps
&U8 14,400 bps
&U9 16,800 bps
&U10 19,200 bps
&U11 21,600 bps
&U12 24,000 bps
&U13 26,400 bps
&U14 28,800 bps
&U15 31,200 bps
&U16 33,600 bps
&Wn Writes current configuration to NVRAM templates.
file:///C/WEBPAGE/guides/rmm/rmm_manl.htm (13 of 21) [2/7/2000 10:55:44 AM]
