RMM Rack Mount Modem; User's Guide
| &W0 | Modifies the NVRAM 0 template (Y0). |
| &W1 | Modifies the NVRAM 1 template (Y1). |
&Yn | Sets break handling | |
| &Y0 | Destructive, but doesn't send break. |
| * &Y1 | Destructive, expedited |
| &Y2 | |
&Zn=s | Writes phone number s to NVRAM at position n (n = 0 - 3). | |
&Zn=L | Writes the last executed dial string to NVRAM at position n (n = 0 - 3). | |
&Zn? | Displays the phone number stored at position n (n = 0 - 3). | |
&ZL? | Displays the last executed dial string. | |
+++Escapes to online Command Mode.
6.S-Registers
Note: To change a setting, use the ATSr=n command, where r is the register and n is a decimal value from zero to 255 (unless otherwise indicated).
Register |
| Default |
| Function |
S0 | 1 |
| Sets the number of rings on which to answer in Auto Answer mode. | |
|
|
|
| When set to 0 (zero), Auto Answer is disabled. Auto Answer is also |
|
|
|
| controlled by DIP Switch 5. |
S1 | 0 |
| Counts and stores the number of rings from an incoming call. Register | |
|
|
|
| S0 must be greater than 0. |
S2 | 43 |
| Stores the ASCII decimal code for the escape code character. The | |
|
|
|
| default character is +. Any value between 128 and 255 will disable the |
|
|
|
| escape code. |
S3 | 13 |
| Stores the ASCII code for the Carriage Return character. Valid range | |
|
|
|
| is 0 to 127. |
S4 | 10 |
| Stores the ASCII decimal code for the Line Feed character. Valid | |
|
|
|
| range is 0 to 127 |
S5 | 8 |
| Stores the ASCII decimal code for the Backspace character. Any value | |
|
|
|
| between 128 and 255 will disable the Backspace key's delete function. |
file:///C/WEBPAGE/guides/rmm/rmm_manl.htm (14 of 21) [2/7/2000 10:55:44 AM]
