JVC HR-J655EK setup guide Express Timer Programming, Start Time, Enter Programme Date

14BASICOPERATIONS (cont.)

Express Timer Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

	ACCESS VIDEO PLUS+
	SCREEN
1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
	Press START +/–. (If you’re			– P1 –
	just starting out, “P1”
			START			STOP
2 appears.)
			– –:– –	=		– –:– –
			SP		VPS/PDC OFF
			DATE			TV PROG
			– –.– –				– –
		[+/–] =
		[PROG] : EXIT

8 DC 4 TOP+/ –

2,3

START+/–

1

4

7

2

5

DAILY3

6

9

2

WEEKLY

4 10

TV PROG+/– 6

The front display panel looks like this:

SP

ENTER PROGRAMME
START TIME
Press START +/– to enter	– P1 –
the time you want
	START STOP
3 recording to start.

1,9 PROG 1

? DATE+/

	SP/LP	–	5
		7
3		OK 9

	21:00 =			– –:– –
● Press and hold START			SP	VPS/PDC OFF
+/– to move in 30-			DATE	TV PROG
minute increments, or			– –.– –		– –
press and release
		[+/–] =
repeatedly to move 1
		[PROG] : EXIT
minute at a time.
The front display panel looks like this:
SP

	ENTER PROGRAMME STOP
4	TIME
	Press STOP +/– to enter the time you want recording to
	stop.
	● Press and hold STOP +/– to move in 30-minute
	increments, or press and release repeatedly to move 1
	minute at a time.

ENTER PROGRAMME DATE

5 Press DATE +/– to enter the date on which you wish to record. (The current date first appears on screen. The date you enter will appear in its place.)