JVC HR-J655EK setup guide Video Plus+ Timer Programming

12BASICOPERATIONS (cont.)

Video Plus+

Timer

Programming

Before performing Video Plus+ Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

With Video Plus+, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

ACCESS VIDEO PLUS+ SCREEN

1	Press PROG.	VIDEO PLUS+
		[0 – 9] =
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT

The front display panel looks like this:

ENTER PLUSCODE NUMBER

Press the NUMBER keys to	VIDEO PLUS+
enter the PlusCode
	1 2 3 4 5 6 7 8
2 number of the programme
you wish to record.

●If you make a mistake, press and input the

2 1

NUMBER 4

5 PDC 7

STOP+/–

2

5

DAILY3

6

9

2

4

WEEKLY

7

correct number.	[0 – 9] =
	[ ] : DELETE
	[PROG] : EXIT

The PlusCode number you enter appears on the front display panel:

The display panel shows only a 4-digit number.

ACCESS VIDEO PLUS+ PROGRAM

1,6 PROG 1 ?

	SP/LP	4
3		OK 3,6

SCREEN

	Press OK, and the Video				– P1 –
	Plus+ Program screen			VIDEO PLUS+ 123456789
3 appears (if you’re just				START		STOP
			21:00		= 22:00
	starting out, “P1” appears).			SP	VPS/PDC OFF
	The display panel shows the
				DATE		TV PROG
	programme start time.
			25.12		1
	Pressing	changes the				BBC 1
	display to the programme
				: OK
	stop time, then the date and
	preset position.
		SP

IMPORTANT

Make sure the preset position number you wish to record is displayed; if not, see "Video Plus+ Setup" on page 40 and set the Guide Program number for that PlusCode number correctly.

●If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid PlusCode number.

●If the "GUIDE PROG SET" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 13.