Specifications
Model |
| ||
Effective Capacity | 22.3 cu.ft. (632L) |
| 24.4 cu.ft. (690L) |
Exterior Dimensions | 30.3" x 32.7" x 77.0" |
| 30.3" x 32.7" x 77.0" |
(W x D x H) | (770 x 830 x 1955) mm |
| (770 x 830 x 1955) mm |
Interior Dimensions(Net) | 25.6" x 28.0" x 53.9" |
| 25.6" x 27.5" x 59.8" |
(W x D x H) | (650 x 710 x 1370) mm |
| (650 x 700 x 1520) mm |
Net Weight (Approx.) | 330 lbs. (150 kg) | 330 lbs. (150 kg) | |
Exterior | Painted Steel |
| |
Interior | Painted Steel |
| |
Insulation | |||
Compressor | 1/2 HP (400W), Hermetic Rotary type | ||
Defrosting System | Automatic defrost of evaporators |
| Manual defrost |
Refrigerant | Environmentally friendly, HFC refrigerant | ||
Shelves (Max.load) | 4 adjustable wire shelves, 110 lbs. (50 kg) capacity each | ||
Access Ports | Diameter 30 mm (left) / Diameter 20 mm (top) | ||
Temperature Control | Microprocessor control, LED display, digital input | ||
Temperature Range | |||
Casters | 4 casters with 2 adjustable feet |
| |
Alarm and Safety | High/low temp alarm, door ajar alarm, power failure, remote alarm contacts, memory backup | ||
Accessories | 1 key set |
| |
Electrical | 115 V, 60 Hz, 15 Amp breaker, NEMA | ||
Options | |||
|
|
|
|
Options:
Circular Chart | Complete Bin (14 total) | Inventory Rack |
Temperature Recorder | Storage System | |
Model No. 730MFB | Rack Capacity:24 | |
|
|
Dimensional Data
|
|
|
| 770 (30.3”) |
|
| 650 (25.6”) |
|
| 140 (5.5”) |
|
10 | 278 |
|
(0.4”) |
| |
(10.9”) |
| |
| (16.9”)430 |
|
(61.9”) | 1890 (74.4”) | 1955 (77.0”) |
1572 |
|
|
30 |
|
|
(1.2”) | 65 (2.6”) |
62 (2.4”)
240
(9.4”)
65 (2.6”)
1520 (59.8”)
65 (2.6”) |
832 (32.8”)
770 (30.3”)
710 (28.0”) 90 (3.5”)
| 1030 (40.6”) |
300 (11.8”) | U |
|
|
|
| 770 (30.3”) |
|
| 650 (25.6”) |
|
| 140 (5.5”) |
|
10 | 278 |
|
(0.4”) |
| |
(10.9”) |
| |
| (16.9”)430 |
|
(61.9”) | 1890 (74.4”) | 1955 (77.0”) |
1572 |
|
|
30 |
|
|
(1.2”) | 65 (2.6”) |
62 (2.4”)
240
(9.4”)
65 (2.6”)
1520 (59.8”)
65 (2.6”) |
832 (32.8”)
770 (30.3”)
700 (27.5") 90 (3.5”)
| 1030 (40.6”) |
300 (11.8”) | U |
Product conforms to RoHS (European Restriction of Hazardous Substance directives)
Validation Services
SANYO offers a wide range of high quality validation services for all of our equipment. These services include on site validation, custom validation, custom validation support packages, factory acceptance testing, critical utility qualifications, NIST traceable calibration. Choosing SANYO as an equipment supplier and validation consultant can greatly reduce the time and cost involved with setting up and operating new equipment.
SANYO Commercial Solutions A Division of SANYO North America Corporation 1300 Michael Drive, Wood Dale, IL 60191 USA Toll Free USA
SANYO Canada, Inc.
1- 300 Applewood Crescent, Concord, Ontario L4K 5C7