![](/images/new-backgrounds/1187011/187011159x1.webp)
5.Monitor the progress of the command in the History Log View.
6.See the results of the command in the History Log View and in the Status column of the Device List View.
NOTE: You have to make sure a device is reachable by EliteConnect Management Utility through the IP address/domain name and port specified in the device list.
Canceling Batch Command Execution
Fig. 104 Cancel Waiting Commands menu command.
When a network batch command is in execution, you can click Cancel Waiting Commands on the Device menu to cancel all commands waiting in EliteConnect Management Utility’s work queue.
After the currently in-action commands complete or fail, all waiting com-
mands are canceled.
NOTE: Depending on the HTTP behavior parameters specified on the HTTP tab of the
Checking Whether Devices Are Alive
To check whether the selected devices are alive, carry out the Check Alive command.
If the Status column shows “Alive” after the device management command is completed, the MAC Address, Firmware, Up Time, and Model columns also show system information about the device.
Configuring a Device by Web Browser
To configure the selected device by Web browser, carry out the Configure by Web Browser command.
80